FALCON EYES Smart Car DIY Assembly Chassis Omnidirectional Mobile with Drive Coding Integrated Board
Main Features:
● Product material: aluminum alloy + programming board
● Mecanum wheel: diameter 60mm, thickness 24mm, load capacity: 15kg
● Parameters: working voltage 7 - 30V, maximum current: 3.6A
● Rated motor voltage: 12V, motor power: 7W, reduction ratio: 1:30, wheel speed: 320RPM after deceleration
● The chassis is made of 3mm thick aluminum alloy plate, which is compatible with various development boards such as MAKEBLOCK, ARDUINO, STM32, 51, Raspberry Pi
● 4 standard 60mm Mecanum wheels, can be turned back and forth, left and right, stamping and integral molding, surface oxidation and coloring, heavy and beautiful, not easy to damage
● Four 12V motors, integrated T1 dedicated motor drive IC, PWM signal direct control
● The 22 pole magnet is matched with the hall AB dual-phase encoder 5V, which can measure the speed feedback
● The load can reach about 10kg
● With overheat protection, overcurrent protection, automatic dead zone control, automatic fault recovery
●Note: The interface can not be plugged in and out, which can cause damage to the circuit
● Product material: aluminum alloy + programming board
● Mecanum wheel: diameter 60mm, thickness 24mm, load capacity: 15kg
● Parameters: working voltage 7 - 30V, maximum current: 3.6A
● Rated motor voltage: 12V, motor power: 7W, reduction ratio: 1:30, wheel speed: 320RPM after deceleration
● The chassis is made of 3mm thick aluminum alloy plate, which is compatible with various development boards such as MAKEBLOCK, ARDUINO, STM32, 51, Raspberry Pi
● 4 standard 60mm Mecanum wheels, can be turned back and forth, left and right, stamping and integral molding, surface oxidation and coloring, heavy and beautiful, not easy to damage
● Four 12V motors, integrated T1 dedicated motor drive IC, PWM signal direct control
● The 22 pole magnet is matched with the hall AB dual-phase encoder 5V, which can measure the speed feedback
● The load can reach about 10kg
● With overheat protection, overcurrent protection, automatic dead zone control, automatic fault recovery
●Note: The interface can not be plugged in and out, which can cause damage to the circuit
Specification
General | Material: Aluminum Alloy,Electronic Components |
|---|---|
Dimensions and Weight | Product weight: 1.3000 kg Package weight: 1.5000 kg Product size (L x W x H): 12.00 x 6.00 x 3.00 cm / 4.72 x 2.36 x 1.18 inches Package size (L x W x H): 20.00 x 10.00 x 5.00 cm / 7.87 x 3.94 x 1.97 inches |
Package Contents | Package Contents: 4 x Wheel, 4 x Coupling, 1 x Aluminum Alloy Base Plate, 4 x Motor, 4 x Drive Encoder Board, 4 x Magnet, 4 x Motor Seat, 1 x Screw 1 x Coupling Wrench, 8 x Wire |