DSO150 Handheld Digital DIY Oscilloscope Set
Main Features
● Display and MCU are now mounted on the same board ( mainboard ) to avoid using inter board pin headers
● Fully installed mainboard
● Rotary encoder makes parameter adjustment much quicker and easier
Specifications
- Number of channel: 1
- Analog band width: 0 - 200KHz
- Sensitivity: 5mV/Div - 20V/Div
- Sensitivity error: less than 5 percent
- Resolution: 12-bit
- Input Impedance: 1M ohm
- Maximum input voltage: 50V
- Coupling: DC, AC, GND
- Max real-time sampling rate: 1Msps
- Record length: 1024
- Trigger modes: auto, normal, single
- Trigger types: rising / falling edge
- Trigger position: 2.4-inch color TFT LCD with 320 x 240 resolution
- Power supply: 9V DC ( please make sure the power supply is 9V, lower or higher than 9V will cause problems )
- Supply current: 120mA
- Dimension: 115mm x 75mm x 22mm
● Display and MCU are now mounted on the same board ( mainboard ) to avoid using inter board pin headers
● Fully installed mainboard
● Rotary encoder makes parameter adjustment much quicker and easier
Specifications
- Number of channel: 1
- Analog band width: 0 - 200KHz
- Sensitivity: 5mV/Div - 20V/Div
- Sensitivity error: less than 5 percent
- Resolution: 12-bit
- Input Impedance: 1M ohm
- Maximum input voltage: 50V
- Coupling: DC, AC, GND
- Max real-time sampling rate: 1Msps
- Record length: 1024
- Trigger modes: auto, normal, single
- Trigger types: rising / falling edge
- Trigger position: 2.4-inch color TFT LCD with 320 x 240 resolution
- Power supply: 9V DC ( please make sure the power supply is 9V, lower or higher than 9V will cause problems )
- Supply current: 120mA
- Dimension: 115mm x 75mm x 22mm
Specification
Dimensions and Weight | Product weight: 0.1590 kg Package weight: 0.1620 kg |
|---|---|
Package Contents | Package Contents: 1 x Main Board, 1 x Analog Board, 1 x Plastic Case, 1 x Components Bag, 1 x BNC-clip Cable |
